Maritime and Oil Offshore Engineering Industries Coating Inspector (CMCI) Level II

Certified by MIGAS, APITINDO & DISNAKER

Overview
This training focuses based on through advanced inspection techniques and specialized application for both steel and non-steel structures in field of maritime and oil offshore engineering industries. The course includes in depth coverage of surface preparation, coating types, inspection criteria, and failure modes for various coatings special, coatings linings, including QSHE awareness in spiritual manner.

Benefits
Upon successful completion of this training, participants will be able to:
 

  1. Well understands in corrosion theory and prevention
  2. Well judgment of corrosion and coating failures
  3. Design, perform and judgment of coating Specification
  4. Performing coating inspection based on code, rules and specification
  5. Well awareness of what our role with our existences
  6. Well Qualified and Certified beyond National & International Requirement.
     

Who Should Attend

  1. Quality Assurance & Quality Control Department
  2. Supervisor
  3. Consultant & Engineering
  4. All personnel who is interested in increasing his/her coating inspection knowledge
  5. Further taking examination on NACE Coating Inspector certification.
     

Training Modules
Coating Inspector Level II Training Module consist of 5 modules, as follows:

MODULE I (QSHE Awareness With Our God Voice)

MODULE II (Material, Welding, and NDT Defectology)

MODULE III – Coating Inspector Sections :
1. Introduction to Corrosion Control
2. Type of Corrosion
3. PSPC (Performance standard of protective coating) in ship
4. Liquid Applied Coating
5. Coating type Organic and Un-Organic
6. Coating Failure
7. Coating Specification
8. Material Safety Data Sheet
9. Abrasive Material
10. Inspection Procedure
11. Coating Inspector Job and Responsibility
12. ISO 12944
13. Environmental Test
14. Surface Preparation
15. Spray application
16. DFT Instrument
17. Inspection tools Assignment
18. Recording and Reporting
19. Work Practice
20. Complete Report
21. Final Written Examination

MODULE IV – Safety DISNAKER
MODULE V – Safety MIGAS

Instructor and Examiner

  1. Mr. Sofyan T.S (EX-ABS Senior Surveyor / Ikbal-M-Yos)
  2. Mr. Gathut Setyo Kuncoro (Coating & Painting Consultant / CEO of  PT. Panca Utama Sakti)
  3. Mr. Awang Sasongko (Coating & Painting Practician, PT. Tosan Aji Mumpuni)
  4. Mr. Mujianto Ali (NACE Certified Coating Inspector #6858, Level III)
  5. Mr. Adrian Paruntu (NACE Certified Coating Inspector #174, Level III)
  6. Mr. Etmon Hanofiar (Technical Representative at ABS Consulting In., Approved Aramco Inspector, & Painting Inspector BGAS Grade 2 Certified #50417)
  7. Mr. Buktirantau (DISNAKER Batam)
  8. Mr. Novwan Nazar (HSE/Operation Engineer BP Migas/SKK Migas)

Other number of Painting Inspector Practician from coating & painting consulting companies

Pre-requisites for attending this training:

  1. Minimum DIII Technique or
  2. Senior high school with minimum 3 (three) years as supervisory level experiences.
  3. Senior high school with minimum 1 (one) year as QA staff or welding Inspector Experiences

Duration

  1. 1 months / 100 hours minimum
  2. Normal training conducted at 19.00 to 23.15

Schedule Training
To be advice accordingly

Avenue

  1. Yayasan Pendidikan IKBAL-M-YOS - Main Campus Building, Garama Citra Hill Complex Block R No 3, 4, 6 & 7, Jl. Yos Soedarso, Batu Ampar, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)
  2. Yayasan Pendidikan IKBAL-M-YOS - Campus II Building, Ruko Perumahan Taman Merapi Subur Block A1 No. 3, 4 & 5, Batu Aji, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)

Certificate
Upon completion and passed examinations, the participant will be awarded COATING INSPECTOR LEVEL II Certified by MIGAS, APITINDO and DISNAKER Batam

HSE Exhibition 2018

SCHEDULE TENTATIVE TRAINING ON MARCH 2023

DI KAMPUS UTAMA  :
- COATING INSPECTOR Gel. 27
- MT/PT ASNT LEVEL II Gel. 66
- SAFETY OFFICER / AHLI K3 MADYA Gel. 33
- WELDING INSPECTOR Gel. 54
- UT ASNT LEVEL II Gel. 44
- INSTRUMENT INSPECTOR Gel. 45 

OTHER TRAINING 

-NDT EN/ISO 9712 :
- Visual Testing (VT) EN/ISO 9712 Level 2 
- Magnetic Testing (MT) EN/ISO 9712 Level 2 
- Penetrant Testing (PT) EN/ISO 9712 Level 2 
- Ultrasonic Testing (UT) EN/ISO 9712 Level 2 
- Radiographic Interpreter (RI) EN/ISO 9712 Level 2 
- LEAD AUDITOR COURSE IRCA - ISO 9001:2015 G
- EDDY CURRENT (ET) ASNT LEVEL II 
- UNDERWATER VISUAL INSPECTOR (CSUVII) 
- PRESSURE VESSEL INSPECTOR (CPVII) 
- PIPING INSPECTOR (CPPII) 

 

PENDAFTARAN BISA DILAKUKAN DI:

1. KAMPUS UTAMA, Batu Ampar.

Silahkan Kontak: Ms. Ema / Windri / Adit 

Telp. 0778-412757 atau 0778-413010

Email: ikbalmyos@ikbalmyos.com

SMS/WA: +62811701435

fb twitter youtube lingin