Ultrasonic Testing ASNT Level II

Certified By LEVEL III, MIGAS, APITINDO & DISNAKER

Description
This training offers a high practical content and relevant theoretical background to enable student to achieve well understanding of ultrasonic inspection, qualified to operate Ultrasonic flaw detector and judgment the quality of welding based on the acceptance criteria used.

Benefits
Upon successful completion of this training, participants will be able to:

  1. Upon successful completion of this training, participants will be able to:
  2. Well understands in ultrasonic testing theory and principle.
  3. Calibrate a flaw detector with both compression and shear wave
  4. Record accurate thickness measurements, locate, and size lamination in steel plate based on code/rules/standard will used.
  5. Select the correct compression/shear wave probe for the examination of welded butt joints,
  6. locate and size defect based on code/rules/standard will used.
  7. Produce acceptable report.
  8. Aware on QSHE Management, in spiritual manner
  9. Well Qualified & Certified beyond the National & International Requirement.

Who Should Attend

  1. All personnel who require a through and comprehensive of SNT-TC-1A in ultrasonic testing of welded joint.
  2. All NDT personnel, inspector, and technicians engaged in or responsible for, inspection of welding, casting, forgings or fabricated items during manufacture or in services.

Training Modules

Ultrasonic Testing Training Module divided into 6 modules, as follows :

1. MODULE I (QSHE Awareness With Our God Voice)

2. MODULE II (Material, Welding, & NDT Defectology)

3. MODULE III (Module for UT Level I & Level II ASNT Theory & Practice)

  • General Knowledge
  • Terminology, Physical Principles and Fundamentals of Ultrasonic
  • Testing Techniques and their limitation.
  • Equipment and Accessories
  • Calibration test system
  • Specific applications
  • Codes, Standard, Specifications and procedures
  • Recording and evaluation of results.
  • Practice flaw detection(participants shall be wear safety shoes).

4. MODULE IV (Safety MIGAS)

5. MODULE V (Safety DISNAKER)

6. MODULE VI (Examination)

 

UT Training Level II Degree

1. PIPE AND PLATE
2. ALL CONFIGURATION ( TKY Joint )*
* Must certified UT ASNT Level II Pipe and plate 1 year experience

Instructor and Examiner

  1. Mr. Sofyan T.S (EX – ABS / Ikbal-M-Yos)
  2. Mr. Buktirantau (DISNAKER Batam)
  3. Mr. Novwan Nazar (HSE/Operation Engineer BP Migas/SKK Migas)
  4. Mr. Naila Mubarok (MIGAS Jakarta)
  5. Mr. Syaiful Anwar (Safety Inspector / Director at Panca Dynamic Perkasa)
  6. Mr. Wahyuli Rahman (Oceanering)
  7. Mr. Susilo (Oceaneering)
  8. Mr. Ismail (Oceaneering)
  9. Mr. Yurman (Oceaneering)
  10. Mr. Rudiyanto (Drydocks World)
  11. Mr. Ronny Andalas (PT. Pakartek Engineering / Ikbal-M-Yos & ASNT / EN 473 / ISO 9712 / SKT Migas Level III) or
  12. Mr. A. Sivagnanam ( ASNT Level III ) or
  13. Mr. Sugianto ( ASNT Level III ) or
  14. Mr. Bonnie Fajri ( ASNT Level III ) or
  15. Mr. Sajeesh Kumar Babu (ACCP / ASNT / EN 473 / ISO 9712 Level III)
  16. Mr. Etmon Hanofiar (Technical Representative at ABS Consulting In. & Aramco Inspector)

Pre-requisites for attending this training

  1. Academic background ( D-III ) minimum or Bachelor degree in technique.
  2. Senior high school degree and certified ASNT Level I.
  3. Senior high school degree with minimum 3 years experience in welding, fitting & subjected to satisfactory passed of entry test
  4. Senior high school degree with minimum 3 years experience in NDT work.


Duration

  1. 3 Months / 100 hours minimum
  2. Normal training conducted on 19.00 to 23.15 WIB.


Schedule Training
To be advise accordingly

Avenue

  1. Yayasan Pendidikan IKBAL-M-YOS - Main Campus Building, Garama Citra Hill Complex Block R No 3, 4, 6 & 7, Jl. Yos Soedarso, Batu Ampar, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)
  2. Yayasan Pendidikan IKBAL-M-YOS - Campus II Building, Ruko Perumahan Taman Merapi Subur Block A1 No. 3, 4 & 5, Batu Aji, Batam. (As Examination Center/TUK registered by LSP Inspektur Maritim Indonesia - BNSP, and approved as Authorized Training Establishement/ATE by WENS QA under RTC Testing Diagnostics-UKAS Accredited providing Training & Examination for NDT Personnel Qualification in accordance with EN 473 / ISO 9712)

Certificate
Upon completion and pass examinations (General, Specific & Practical) in according to SNT-TC-1A requirement, the participant will be awarded Ultrasonic Testing ASNT Level II Certified by ASNT Level III, MIGAS, APITINDO and DISNAKER Batam.

Last Updated on Wednesday, 09 January 2013 11:22

HSE Exhibition 2018

SCHEDULE TENTATIVE TRAINING ON MARCH 2023

DI KAMPUS UTAMA  :
- COATING INSPECTOR Gel. 27
- MT/PT ASNT LEVEL II Gel. 66
- SAFETY OFFICER / AHLI K3 MADYA Gel. 33
- WELDING INSPECTOR Gel. 54
- UT ASNT LEVEL II Gel. 44
- INSTRUMENT INSPECTOR Gel. 45 

OTHER TRAINING 

-NDT EN/ISO 9712 :
- Visual Testing (VT) EN/ISO 9712 Level 2 
- Magnetic Testing (MT) EN/ISO 9712 Level 2 
- Penetrant Testing (PT) EN/ISO 9712 Level 2 
- Ultrasonic Testing (UT) EN/ISO 9712 Level 2 
- Radiographic Interpreter (RI) EN/ISO 9712 Level 2 
- LEAD AUDITOR COURSE IRCA - ISO 9001:2015 G
- EDDY CURRENT (ET) ASNT LEVEL II 
- UNDERWATER VISUAL INSPECTOR (CSUVII) 
- PRESSURE VESSEL INSPECTOR (CPVII) 
- PIPING INSPECTOR (CPPII) 

 

PENDAFTARAN BISA DILAKUKAN DI:

1. KAMPUS UTAMA, Batu Ampar.

Silahkan Kontak: Ms. Ema / Windri / Adit 

Telp. 0778-412757 atau 0778-413010

Email: ikbalmyos@ikbalmyos.com

SMS/WA: +62811701435

fb twitter youtube lingin